Hammer & Steel, Inc. is proud to offer the innovative ABI excavator mounted vibratory drivers/extractors and
excavator mounted hydraulic augers. These ABI attachments can be easily mounted to your excavator utilizing the
existing hydraulic circuitry.
The model HVR vibratory drivers/extractors combine high frequency vibration and excavator crowd/retract forces to
deliver impressive driving and extracting capabilities.
It also features very short starting and stopping times, high revolutions, small noise levels, and a low weight.
Most importantly is its low design height. This advantage is highlighted when building under bridges or power lines
as very little usable length is lost due to its small design height.
The add-on vibratory pile dirver is used for piling and extracting sheet piles, trench sheet piles, steel beams and
girders, pipes, casings, and full displacement sections.
Specifications
HVR-45
HVR-60
HVR-75
HVR-100
Driving Force
tons
33
44
55
65
Hammer Frequency
rpm
2,450
2,450
2,450
2,350
Max. Oil Pressure Required
psi
4,350
4,350
4,350
4,350
Max. Oil Quantity at Vibrator
gpm
35
51
68
96
Required Power at Vibrator
HP
88
132
175
210
Required Excavator Power
HP
130
160
200
250
Total Weight
lbs.
1,680
2,310
3,410
3,860
Length from Center of Pin
in.
37.5
46
53
55
Standard Jaw Assembly
Single
Single
Interlock
Interlock
HVR 60
HVR 75
Company Headquarters
Branch Offices
11916 Missouri Bottom Rd.
St. Louis, MO 63042
Ph: 800.325.PILE (7453)
Ph: 314.895.4600
Fx: 314.895.4070
