ABI Excavator Mounted Vibratory Pile Driver
Hammer & Steel, Inc. is proud to offer the innovative ABI excavator mounted vibratory drivers/extractors and excavator mounted hydraulic augers. These ABI attachments can be easily mounted to your excavator utilizing the existing hydraulic circuitry.
The model HVR vibratory drivers/extractors combine high frequency vibration and excavator crowd/retract forces to deliver impressive driving and extracting capabilities.
It also features very short starting and stopping times, high revolutions, small noise levels, and a low weight. Most importantly is its low design height. This advantage is highlighted when building under bridges or power lines as very little usable length is lost due to its small design height.
The add-on vibratory pile driver is used for piling and extracting sheet piles, trench sheet piles, steel beams and girders, pipes, casings, and full displacement sections.
|Eccentric Moment (in. lbs.)||390||520||738||868|
|Frequency (rev. / min.)||2460||2460||2300||2135|
|Driving Force (tons)||34||45||55||56|
|Nom. Hydraulic Pressure (p.s.i.)||4640||4640||4640||4640|
|Nom. Hydraulic Flow Rate (gal. / min.)||35||52||65||82|
|Req. Power at Driver/Extractor (h.p.)||94||134||174||228|
|Req. Power at Excavator (h.p.)||100-175||130-235||175-300||235-300|
|Operating Weight (lbs.)||2460||2780||4530||4590|
|Operating Height (in.)||58||62||72||72|
|Shipping Weight (lbs.)||2600||2960||5010||5070|