|
|
 |
|
PVE |
 Standard Frequency & High Frequency Variable Moment Hydraulic Pile Driver & Extractor Systems
"PVE" is a new face in the U.S. construction equipment market. Their superior quality products were first introduced at the
ConExpo Show in March 1999. In the short time since this introduction, PVE has earned the same reputation in the U.S. that
they long enjoyed around the world. They are known for building high horsepower vibratory pile driver/extractor systems that
get the job done reliably even in the toughest driving conditions.
The PVE factory, corporate, and engineering headquarters are located in Sliedrecht, Holland, near Rotterdam. After initial
testing, completed units are shipped to the PVE-USA facility in Jacksonville, Florida for final testing and dispatching.
The PVE-USA office is fully staffed to provide technical assistance in addition to service and parts support.
Hammer & Steel, Inc. is excited to offer a complete line of PVE products and accessories including standard frequency
vibratory pile driver/extractor systems as well as high frequency systems and high frequency/variable moment systems for
sensitive site conditions.
- PVE has recently patented a new high frequency/variable moment vibratory driver/extractor system. This system can be used on sensitive sites without transmitting damaging vibrations to surrounding structures and utilities.
- PVE offers a full range of driver/extractor systems up to the massive model 200M. Accessories include clamping systems for sheet piling, beams, timber piles, concrete piles, and caissons.
- Each PVE hammer system includes unique design and engineering features, such as forced lubrication of exciter transmissions, special machining processes, and heat treatment of many hammer components.
- Only the very best components are used within the PVE systems, including Rexroth pumps and valves, Volvo and Cummins diesel engines, and high quality bearings and gears.
- Each power unit is silenced and includes a full compliment of safety shutdown circuits for protection of the diesel engines and hydraulic systems as well as a unique warm-up circuit for operation in cold weather conditions.
|
| PVE Standard Frequency Driver/Extractor Systems Specifications |
| Model |
23M |
2500 |
38M |
52M |
110M |
200M |
| Eccentric Moment |
in. lbs. |
2200 |
2500 |
3300 |
4500 |
9600 |
17,600 |
| Max. Frequency |
vpm |
1650 |
1700 |
1700 |
1700 |
1350 |
1400 |
| Driving Force |
tons |
82 |
103 |
135 |
186 |
253 |
494 |
| Max. Line Pull |
tons |
45 |
45 |
45 |
55 |
88/132 |
200 |
| Standard Clamping Force |
tons |
96 |
124 |
169 |
225 |
4x113 |
4x169 |
| Weight w/ Standard Clamps(s) |
lbs. |
10,790 |
9350 |
14,690 |
18,700 |
35,000 |
56,000 |
| Max. Amplitude |
in. |
0.87 |
1.1 |
0.87 |
1.02 |
1.22 |
1.22 |
| Height w/ Standard Clamp(s) |
in. |
94.5 |
82.2 |
110.4 |
123.9 |
142.8 |
161.3 |
| Length |
in. |
94.5 |
78.9 |
95.7 |
107.1 |
127.2 |
149.6 |
| Throat Width |
in. |
13.8 |
13.8 |
13.8 |
13.8 |
26.4 |
39.4 |
| Power Unit Model |
|
360 |
360 |
500 |
800 |
1000 |
1600 |
|
| PVE High Frequency & Variable Moment Driver/Extractor Systems Specifications |
| Model |
1420 |
2520 |
2316VM |
2323VM |
40VM |
| Eccentric Moment |
in lbs. |
1250 |
2200 |
0-1400 |
0-2000 |
0-3500 |
| Max. Frequency |
vpm |
2000 |
2000 |
2300 |
2300 |
2000 |
| Driving Force |
tons |
68 |
126 |
104 |
152 |
197 |
| Max. Line Pull |
tons |
34 |
45 |
34 |
45 |
45 |
| Standard Clamping Force |
tons |
96 |
169 |
124 |
169 |
225 |
| Weight w/ Standard Clamp |
lbs. |
6450 |
14,100 |
8250 |
11,590 |
18,040 |
| Max. Amplitude |
in. |
0.82 |
0.82 |
0.67 |
0.67 |
0.75 |
| Height w/ Standard Clamp |
in. |
76.7 |
104.5 |
103.8 |
118.2 |
136.5 |
| Length |
in. |
55.1 |
94.5 |
63 |
68.9 |
102.4 |
| Throat Width |
in. |
13.8 |
13.8 |
12.6 |
13.8 |
12.6 |
| Power Unit Model |
|
280 |
480 |
480VM |
500VM |
800VM |
|
| PVE Hydraulic Power Units |
| Model |
280 |
360 |
480(VM) |
500(VM) |
800(VM) |
1000 |
1600 |
| Diesel Engine Manf. |
|
Cummins |
Volvo |
Volvo |
Volvo |
Volvo |
Volvo |
Volvo |
| Engine Model |
|
6CTA8.3 |
TD1010 |
TD1210 |
TAD1232 |
TAD1631 |
2x
TAD1232 |
2x
TAD1631 |
| Max. Output |
hp |
260 |
318 |
389 |
533 |
750 |
1066 |
1500 |
| Max. Hydraulic Oil Flow |
gpm |
74 |
95 |
126 |
132 |
211 |
263 |
422 |
| Max. Working Pressure |
psi |
5075 |
5075 |
5075 |
5075 |
5075 |
5075 |
5075 |
Dim.
(LxWxH) |
in. |
120 x
52 x 64 |
137 x
55 x 64 |
155 x
65 x 77 |
171 x
65 x 77 |
192 x
65 x 96 |
200 x
88 x 93 |
240 x
96 x 102 |
| Weight |
lbs. |
7718 |
9150 |
12,D6128 |
12,789 |
18,743 |
24,917 |
35,280 |
|
| |
| |
|
|
|
|
| Company Headquarters |
Branch Offices |
11916 Missouri Bottom Rd.
St. Louis, MO 63042
Ph: 800.325.PILE (7453)
Ph: 314.895.4600
Fx: 314.895.4070 |
Benicia, California
Ph: 877.224.3356
Boston, Massachusetts
Ph: 508-888-3314
|
Green Cove Spring, Florida
Ph: 904.284.6800
Houston, Texas
Ph: 281.852.1136
|
Kansas City, Kansas
Ph: 913.681.9295
Vancouver, Washington
Ph: 425.296.4518 |
Minneapolis,
Minnesota
Ph: 952.469.6060
|
|
|
|
