The Dawson excavator mounted, vibrating pile driver is the perfect tool for driving relatively short piles in sands and
gravels. Any experienced pile driver knows that driving relatively short piles using traditional methods is expensive and
cumbersome. When you consider the costs to transport and configure cranes or other pile driving equipment along with the
need for temporary guide frames or templates, there has to be a better way.
The solution is to grab hold of the pile head with a hydraulic clamp on the end of an excavator boom. This means you can
horse the pile head around until it is exactly where you want it. You then need a vibrating pile driver between the boom
head and the hydraulic clamp to provide linear vibrationswhich, in conjunction with the excavators crowd force will stuff
the pile into almost any ground conditions. This is precisely what the vibrating pile driver does.
Of course, it can also pull the piles out with this tool and, if you run into obstructions, all you need to do is detach
the "vibro", put the bucket back on, and hook it out.
Benefits
Slim design allows for easy driving of sheet piles
High power to weight ratio improves efficiency
Universal joint suspension allows for easy alignment of piles
Extremely low vibration transmitted to excavator yield higher operator comfort
Low noise and localized directional vibration make it environmentally friendly
Company Headquarters
Branch Offices
11916 Missouri Bottom Rd.
St. Louis, MO 63042
Ph: 800.325.PILE (7453)
Ph: 314.895.4600
Fx: 314.895.4070
