|
|
 |
|
Banut Hydraulic Impact Hammers |
The SuperRAM is a simple, ruggedly designed and environmentally friendly hydraulic impact hammer, which was developed on
basis of the Classic hammer series. With the new XL design a striking mass up to 12 tons can be used. Beside the pure steel
striking mass, steel/lead mixture up to 6 tons are available.
The steel/lead mixture produces a longer stress wave in the concrete pile, this leads to a reduction of the peak forces in
the pile and causes a larger penetration depth per impact during the impacting procedure. The production rates are increased
thereby. In addition the use of the mixture affects the noise level and the quality positively, since less rejected piles are
produced.
The hydraulic and electrical energy is supplied by the carrier or power pack. In order to be able to proof the load bearing
capacity, SuperRAM hydraulic hammers are equipped with modern sensors for the measurement of parameters such as impact energy,
penetration depth, impact frequency and number of blows.
 |
 |
SuperRAM |
SuperRAM XL |
|
The SuperRAM hydraulic impact hammers are especially suitable for impacting pre-fab concrete piles. SuperRAM series offers
steel/lead striking mass with a weights from 3000 to 6000 kg.
|
The SuperRAM XL hydraulic impact hammers are ideal for impacting of heavy piles e.g. steel casings. They are supplied with
a steel striking mass with weights from 6000 to 12000 kg, however when desired also with steel/lead mixture.
|
|
| SuperRam |
UNIT |
3000 |
4000 |
5000 |
6000 |
8000*** |
10000*** |
| Weight of piston |
kg |
3,000 |
4,000 |
5,000 |
6,000 |
8,000 |
10,000 |
| lbs |
6,600 |
8,800 |
11,000 |
13,200 |
17,600 |
22000 |
| Total Weight |
kg |
4,800 |
5,800 |
6,800 |
7,800 |
10,000 |
12,000 |
| lbs |
10,560 |
12,760 |
14,960 |
17,160 |
22,000 |
26400 |
| Dimensions |
| A. Hammer length in static position |
mm |
3950 |
3650 |
3650 |
4290 |
4290 |
4390 |
| ft |
13 |
12 |
12 |
14 |
14 |
14.5 |
| with max stroke (1400mm/55") |
mm |
5150 |
4850 |
4850 |
5490 |
5490 |
5590 |
| ft |
17 |
16 |
16 |
18 |
18 |
18.5 |
| B. Hammer width |
mm |
740 |
740 |
740 |
740 |
880 |
880 |
| ft |
2.5 |
2.5 |
2.5 |
2.5 |
3 |
3 |
| C. Frame width |
Variable due to customer needs |
| D. Piston centre to guide centre |
mm |
625 |
625 |
625 |
625 |
640 |
640 |
| ft/in |
2' |
2' |
2' |
2' |
2' 1" |
2' 1" |
| E. Piston centre to hammer front |
mm |
340 |
340 |
340 |
340 |
440 |
440 |
| in |
13" |
13" |
13" |
13" |
17" |
17" |
| Performance |
| Drop height, infinitely adjustable to max. |
mm |
150-1200 for concrete / 150-1400 for steel pile |
| in |
6"-47" Concrete piles / 6"-55" steel piles |
| Impact frequency, infinitely adjustable* |
Blows/min |
max 42 blows at max stroke /
max 100 blows at min stroke |
| Impact energy, infinitely adjustable to max (55" stoke) |
kJ |
41.2 |
54.9 |
68.7 |
82.4 |
109.8 |
137.3 |
| ft.lbs |
30,000 |
40,500 |
50,600 |
60,700 |
81,000 |
101,000 |
| Hydraulic System |
| Working pressure |
MPa |
18 |
24 |
29 |
30 |
27 |
30 |
| PSI |
2610 |
3480 |
4200 |
4350 |
3900 |
4350 |
| Hydraulic flow rate |
l/min |
160 |
160 |
160 |
160 |
330** |
350** |
| g/min |
42 |
42 |
42 |
42 |
86 |
92 |
| Required hydraulic power |
kW |
60 |
75 |
90 |
95 |
175 |
185 |
| HP |
80 |
100 |
120 |
127 |
234 |
248 |
| Power Supply |
| Voltage |
V DC |
24 |
24 |
24 |
24 |
24 |
24 |
| Rating |
W |
200 |
200 |
200 |
200 |
200 |
200 |
| * Impact frequency is infinitely adjustable, but dependent on drop height and pump capacity. |
| ** Pump flow less than 330 l/min will influence the number of blows/min |
| *** Not available with 45° batter |
|
| |
| |
|
|
|
|
| Company Headquarters |
Branch Offices |
11916 Missouri Bottom Rd.
St. Louis, MO 63042
Ph: 800.325.PILE (7453)
Ph: 314.895.4600
Fx: 314.895.4070 |
Benicia, California
Ph: 877.224.3356
Boston, Massachusetts
Ph: 508-419-7374
|
Green Cove Spring, Florida
Ph: 904.284.6800
Houston, Texas
Ph: 281.852.1136
|
Kansas City, Kansas
Ph: 913.681.9295
Minneapolis, Minnesota
Ph: 952.469.6060 |
|
|
|
|
